PulseTrainGP20 register
Starts a pulse train on digital output GP20, or stops it if the pulse width is zero.
- Address
- 43
- Payload type
- U32
- Length
- 3
- Access
- Write, Event
Payload
The payload is a structure with the members listed below.
- Interface type
- PulseTrainGP20Payload
| Name | Offset | Default [range] | Description |
|---|---|---|---|
PulseWidth |
0 | 500000 | Specifies the duration in microseconds that each pulse is high. A value of zero stops the pulse train. |
PulsePeriod |
1 | 1000000 [1:] | Specifies the interval in microseconds between the start of each pulse. |
PulseCount |
2 | 1 | Specifies the number of pulses in the pulse train. A value of zero runs the pulse train until it is stopped. |