Table of Contents

Sound Card

Harp Sound Card

Key features

  • Internal memory to store sounds, enabling low-latency sound delivery.
  • Pre-selected sounds can be triggered using an external TTL.
  • Internal wave generator allows the user to play a pure tone without loading a sound file.
  • Stereo 24-bit output at up to 192 kHz sampling rate.

Specs

  • Maximum sampling rate: 192 kHz
  • Number of channels: 2
  • Audio output: 24-bit stereo
  • Input voltage: 12 V DC
  • Output voltage: 2 V rms
  • Sound memory bank: 30 audio storage indices, each with 8 MiB of capacity (approximately 1 million stereo sample pairs stored as 32-bit integers)
  • Sound duration: Each index can store up to 10.922 s of stereo audio at 96 kHz, or 5.461 s at 192 kHz
  • Timestamp resolution: 32 µs
  • Synchronization frequency: 1 Hz
  • Synchronization accuracy: 22 ± 16 µs (between clock generator and this device)
  • Digital outputs: 3 (3.3 V or 5 V, default 5 V, adjustable by jumper setting)
  • Digital inputs: 3 (5 V tolerant)
  • Analog inputs: 2 (0–5 V, 12-bit analog-to-digital conversion)

Benchmarks

  • THD: -111 dB (1 kHz @ 2 V rms)
  • Noise floor: 20 µV rms | -94 dB (20 Hz–80 kHz)
  • SNR: 100 dB | 113 dBA (20 Hz–80 kHz @ 2 V rms)

Hardware

Version Notes
2.2
  • Revised routing and silkscreen
2.1
  • Added analog inputs
1.1
  • Initial version

Firmware

Version Notes
3.0
  • Updated Harp core to 1.15
  • Removed unused registers
  • Fixed the digital input modes and input state events
  • Fixed the digital output modes
  • Added the analog data stream
  • Added the ReadSoundMetadata operator to the interface
  • Implemented the Stop register for stored sounds
  • Split PIC32 registers to delete one sound or all sounds
2.2
  • Updated Harp core to 1.13
  • Dropped Bpod serial communication support
2.1
  • Added the sine wave generator
  • Refactored the interface scripts to take the libusb dependency from NuGet
  • Added the prototype device schema and interface
  • Updated the interface to use the new generators
2.0
  • Initial version


Documentation for release v3.0.0