Audio Amplifier
The Harp Audio Amplifier is a peripheral for the Sound Card that amplifies one output channel with low distortion to drive a speaker. Refer to the connections article to set up the amplifier.

Key features
- Unity gain, so the Sound Card output level is reproduced at the speaker.
- Flat frequency response from 20 Hz to 80 kHz.
Specs
- Number of channels: 1
- Input voltage: 2 × 12 V DC (positive and negative supply)
- Maximum output: 4 W @ 8 Ω / 2 W @ 4 Ω
- Speaker output (with Sound Card): 0.5 W @ 8 Ω / 1 W @ 4 Ω
- Compatible speakers: 4 Ω impedance or higher. The XT25SC90-04 (Peerless by Tymphany) offers a good frequency response up to 80 kHz
- Input connector: RCA input from sound card
- Output connector: Banana plug to speaker
Benchmarks
- SNR: 119 dB (A-weighted, 80 kHz bandwidth)
- Spectral variation: <0.1 dB (20 Hz–80 kHz)
- Distortion: <0.03% @ 1 W
Hardware
| Version | Compatible Sound Card | Notes |
|---|---|---|
| 2.0 | >= v1.1 |
|
Assembled units are available from the Open Ephys store, or build your own using the hardware design files in the Audio Amplifier repository.
Documentation for release v3.0.0