Table of Contents

Errors

This article covers how to resolve common errors on the Sound Card.

COM port errors

Q: In Bonsai, running the workflow throws an error "The port ComX does not exist".

A: Either the wrong communications port in the PortName property in Device was selected, or the USB (Computer) cable is not properly connected. Try selecting a different communications port and checking the connection.

Q: Running the Bonsai workflow or connecting to the device in the Sound Card app throws an error "Access to the port ComX is denied".

A: Only one interface connection to the Sound Card can be opened at one time. Check that Bonsai and the Sound Card app are not running simultaneously, and that multiple instances of either are not running. Sometimes, the port can also be locked by a program that did not terminate correctly, and restarting the computer fixes it.

Sound upload errors

Q: Uploading a sound or reading sound metadata throws an error "Sound Card not detected. Check that its soundbank USB port is connected to the computer and that its driver is installed.".

A: The computer cannot find the sound memory controller. Check that the USB (Soundbank) cable is connected, that the device is powered, and that the driver is installed. Without the driver, the soundbank is not visible to the computer even when the cable is connected.

Q: Uploading a sound throws an error "The Sound Card is playing a sound at 192 kHz and cannot receive a new sound.".

A: The device cannot receive a new sound while a sound with a 192 kHz sample rate is playing. Stop playback with the Stop register, or wait for the sound to end, and upload it again.

No sound

Q: The sound does not play.

A: Check the AUDIO LED when the sound starts:

  • If the LED stays off, the sound index may be empty. Starting an empty sound index does nothing, so check the stored sounds as described in the Manage stored sounds article.
  • If the LED turns on but nothing is heard, check the amplifier, speaker and cables by following the audio connection instructions. Pure tones play only on the Right Channel.


Documentation for release v3.0.0