Overview
The Harp Timestamp Generator Gen3 is a clock synchronization device for the Harp ecosystem.
Behavioral rigs often include multiple Harp devices that acquire data simultaneously. Since each Harp device timestamps data using an onboard clock, their individual clocks must be synchronized. The Timestamp Generator Gen3 uses its onboard clock to generate and distribute the current Harp timestamp to every connected Harp device, allowing them to continuously synchronize their onboard clocks. As a result, data streams acquired across the entire rig are timestamped on the same clock in real time and do not require any post-hoc alignment.
The Timestamp Generator Gen3 provides:
- Synchronization of up to six Harp devices from a single unit, with the option to daisy-chain additional units as repeaters for larger systems.
- A shared clock for Harp devices connected to different acquisition computers, enabling distributed experimental setups.
- An internal battery that keeps the clock running when external power is lost, so data acquired before and after an interruption are timestamped on the same clock. This is particularly useful for long-term experiments spanning multiple days.
- Bonsai integration for flexible experiment acquisition and control.
Getting a device
Assembled units are available from the Open Ephys store, or build your own using the hardware design files in the Timestamp Generator Gen3 repository. Once you have a device, follow the "Getting started" section to set up the device and install the software.
Acknowledgments
Hardware design contributed by OEPS, Bonsai interface by NeuroGEARS, and documentation by Open Ephys. Developed and tested as part of the Aeon platform at the Sainsbury Wellcome Centre. The platform is described in Campagner et al. (2025).
Documentation for release v1.4.0