Table of Contents

Timestamp Generator Gen3

Harp Timestamp Generator Gen3

Key features

  • Distributes the Harp synchronization clock to up to 6 Harp devices.
  • Operates as a clock generator (the default) or as a clock repeater that re-distributes an incoming clock, allowing several units to be daisy-chained in larger setups.
  • Internal battery to prevent clock interruption during power outages.
  • Programmable clock start time, with a lock to avoid resetting the clock by mistake.
  • LED indicators for connected devices, battery level, and device status.

Specs

  • Clock inputs: 1
  • Clock outputs: 6
  • Timestamp resolution: 32 µs
  • Synchronization frequency: 1 Hz
  • Synchronization accuracy: 22 ± 16 µs
  • Battery capacity: 2 Ah (lithium polymer)
  • Battery runtime: up to 24 h
  • Battery default charging thresholds: 3.7–3.8 V (configurable)
  • Battery charging safety limits: 3.6–4.1 V (charging starts or stops automatically when the battery reaches these limits, regardless of the configured thresholds)
  • Battery depleted limit: 3.5 V (the battery protection circuit shuts the device down, or keeps it from starting up, without external power)

Hardware

Version Notes
1.4
  • Added a battery protection circuit that shuts the device down when the battery drops below 3.5 V
1.3
  • Changed the USB Mini-B connector to USB-C
1.2
  • Initial version

Firmware

Version Notes
1.4
  • Suspended the serial port while the device runs without USB power
  • Raised the battery voltage thresholds
1.3
  • Raised the Harp core to 1.15
1.2
  • Added a unitary periodic counter
  • Implemented and exposed the connected devices register in device.yml
1.1
  • Added a prototype device schema and interface
  • Fixed the charge/discharge stop command
  • Updated the interface to use the new generators
  • Raised the Harp core to 1.13
1.0
  • Initial version


Documentation for release v1.4.0