Timestamp Generator Gen3 device
- WhoAmI
- 1158
- Log files
TimestampGeneratorGen3_<address>.bin
Use the Harp device pattern to initialize the device, log data, and send commands to and receive messages from the Timestamp Generator Gen3.
Check out the following in-depth guides to learn how to access the device functionality with the Harp.TimestampGeneratorGen3 package:
Registers
The core registers implemented by every Harp device, such as WhoAmI and OperationControl, are described in the Device Registers and Operation specification.
| Name | Address | Type | Access | Description |
|---|---|---|---|---|
Config |
32 | U8 | Write | Specifies the device configuration |
DevicesConnected |
33 | U8 | Read | Specifies which CLK_OUT ports have devices connected. |
BatteryRate |
35 | U8 | Write | Configure how often the battery value is sent to computer |
Battery |
36 | Float | Event | Reads the current battery charge |
BatteryThresholdLow |
37 | Float | Write | Specifies the low threshold from where the battery should start to be charged |
BatteryThresholdHigh |
38 | Float | Write | Specifies the high threshold from where the battery stops being charged |
Timer |
41 | U32 | Write, Event | Unitary counter that periodically produces a value at the frequency defined by register TimerFrequency. |
TimerFrequency |
42 | U8 | Write | Frequency at which the Timer will generate new values. |